info@anxingmachinery.com WhatsApp

Diesel Forklifts

3 Ton Diesel Forklift

  • ModelAX-DF30
  • Power systemDiesel
  • Primary applicationOutdoor yards, loading docks and general material handling

A 3,000 kg diesel forklift for outdoor yards, loading areas and general material handling where diesel power is appropriate. The extracted source table lists a 500 mm load centre, 3,000 mm fork lifting height and XINCHAI C490BPG engine; confirm the final mast, tyres and attachment configuration before quotation.

Rated capacity
3,000 kg
Load centre
500 mm
Fork lifting height
3,000 mm
Engine
XINCHAI C490BPG
Get Price & Lead Time Check My Application

Share your working requirements, quantity and destination. We’ll review the application and confirm the right configuration before quoting.

3 Ton Diesel Forklift

Buying checklist

Start With the Job, Not Just the Price

The right machine depends on the job, the site and the expected workload. Review the points below before comparing quotations.

Where This Model Fits

  • Outdoor yards and loading routes

    A diesel forklift is usually selected for outdoor or ventilated handling where fuel supply, surface condition and route width are suitable.

  • 3,000 kg loads at 500 mm load centre

    Use the rated capacity and load centre as the first selection reference, then confirm mast, fork length and attachment effects.

  • Sites that can operate diesel equipment

    Confirm ventilation, emissions requirements, refuelling access and local maintenance support before order.

Confirm Before Ordering

  • Load weight, dimensions and load centre

    Rated capacity depends on the load centre and final configuration. Share the heaviest load, pallet size and any off-centre handling requirement.

  • Lift height, mast and overhead clearance

    Confirm rack height, doorway height, free lift and lowered mast height before selecting a mast or publishing capacity at height.

  • Route, aisle and floor conditions

    Provide aisle width, turning space, ground condition, ramp angle and indoor/outdoor use so the tyre and power configuration can be matched.

  • Destination and attachments

    Destination rules, side shift, clamps, fork extensions or other attachments may change the final quotation and available capacity.

Configuration options

Available Options & Attachments

Availability, compatibility and any effect on rated performance will be confirmed for the selected configuration.

Solid tyres

Listed in the source image as an optional configuration. Confirm floor condition, travel route and maintenance preference before selection.

Full free lift

Listed as optional. Confirm doorway, container and low-clearance operating needs before choosing the mast type.

Side shift

Listed as optional. Confirm load type and final residual capacity with the selected mast and attachment.

Attachments

Attachment selection should be checked against load size, load centre, hydraulic requirements and final load chart.

Send the working conditions you already know. We’ll help confirm the remaining configuration details.

Check My Configuration

Full specifications

Technical Specifications

Use these figures for initial comparison. Final specifications may vary with the selected power system, attachments and configuration.

Item Specification
Model AX-DF30
Source model CPC30 / CPCD30
Rated capacity 3,000 kg
Load centre 500 mm
Power type Diesel
Maximum lifting speed, no load / full load 450 / 420 mm/s
Maximum travel speed, full load / no load 18 / 20 km/h
Maximum traction, full load / no load 16 / 11 kN
Gradeability, full / empty 15 / 20%
Fork lifting height 3,000 mm
Free lifting height 80 mm
Mast inclination angle, front / back 6 / 12 degrees
Minimum turning radius 2,540 mm
Minimum right angle channel 2,050 mm
Minimum ground clearance 135 mm
Overall length including fork 4,075 mm
Overall width 1,230 mm
Mast lowered height 2,110 mm
Mast extended height 4,270 mm
Overhead guard height 2,105 mm
Wheelbase 1,760 mm
Front tyre 28*9-15
Rear tyre 6.50-10
Standard fork length 1,220 mm
Engine model XINCHAI C490BPG
Rated power 40 kW
Maximum torque 162 Nm
Transmission Mechanical / Hydraulic
Values are extracted from the referenced Anxing CPC30/CPCD30 parameter image. Final quotation should confirm mast, tyres, attachments and destination requirements.

Need a different capacity, working height, power system or attachment?

Ask About Options

Buyer questions

3 Ton Diesel Forklift FAQs

Find quick answers about capacity, configuration, site fit, operation and ordering. For a model-specific answer, include your application, target specification, quantity and destination.

Ask a Product Specialist
What is the rated capacity of AX-DF30?

The extracted source table lists 3,000 kg rated capacity at a 500 mm load centre.

Which engine is listed?

The source table lists XINCHAI C490BPG with 40 kW rated power. Confirm engine choice and emissions requirements for the destination market.

Can this diesel forklift work outdoors?

Diesel power is normally selected for outdoor or ventilated sites, but ground condition, ramp, tyre type and local rules must be confirmed.

Which options are available?

The source image lists solid tyres, full free lift, side shift and attachments as options; final compatibility should be confirmed by configuration.

Application review & quote

Tell Us About the Job. We’ll Recommend the Right AX-DF30 Setup.

Share the working target, site conditions, operating hours and destination. We’ll review the application and prepare a recommended configuration, price and estimated lead time.

  • Required capacity, working height, digging depth or other performance target
  • Working environment, available space, ground conditions and expected duty cycle
  • Preferred power source, attachment and other configuration requirements
  • Estimated quantity and destination country, city or port

The selected product and model are added automatically. Share only the details you know—our team will help confirm the rest.